#210 Deerskin Dean | LE

• Waist Length Back:  25.5" - 27"
• Vintage Construction With Double Stitched
• Seams Hidden 6-Snap Front Closure
• Vintage Tack Button Sleeves, Chest Pockets & Back
• Bonded Nylon Beige Thread
• EXCLUSIVE Custom Design & Tanned Leather
• (2) 6" Slanted Hand Pockets & (2) Upper Chest Pockets
• Inside Zipper Pocket & Inside Open Pocket
• Designed In California & Hand-Crafted In Mexico
• SKU: 7210-DT

• Garment Grade Italian Deerskin (US Hides Tanned In Italy)
• 6oz. Pin-Striped Chambray Cotton Liner
• Antique Brass Ykk USA Tack-Buttons & Snaps (USA)

Our Italian "Garment" Deerskin is our softest and "drapiest" leather we have ever made. Italian deerskin will give you a similar fit and feel as lamb but with better grain and a much more durable jacket. The skins are full-grain aniline dyed with a semi-naked finish in a 3-3.5oz. The surface has a natural pebble-grain that is very uniformed with a matte finish. The feel is on the opposite side of the scale in comparison to our Horween® horsehide. It is soft, supple and does not need to be broken in. Deerskin has more stretch and is known for it's extremely supple hand.

Because these hides are mostly from wild deer that are hunted, there is a limited supply and only the best skins from that small pool are used for garment leathers. We have the hides imported from a tannery in central Italy that specializes exotic "Garment" leathers. It is our most expensive jacket leather but also some of the finest "garment grade" deerskin that we have ever seen.  

The fit and seam orientation was drawn from original "trucker" style jackets made in the 1970's and 80's. The overall fit is slightly slimmer in the taper than our other jackets, but cut very comfortable in the chest and armholes. The length is a true "waist cut", designed to fall just at or below the belt. The shoulders are narrower but the sleeves are horizontally aligned for better movement and comfort. It tapers 2-3" from the chest to the bottom and the back will include two tack buttons on each side with an adjuster loop. There is an optional "Tall Cut" as well that will add 2" to the length and 1" to the sleeves.
CLICK HERE To View Our Jacket Fit & Leather Guide

We love building products a lot more than repairing them!  That’s why we design and build our products to last. We want the product to give you a lifetime of use, but if they fail due to a manufacturing defect, we will repair the product or replace it at little or no charge for the life of the product. 

There are some limitations and we do offer a “CLC Trade-In” program as well. Click here to read more about our complete warranty & trade-in policies. 

https://coronadoleather.com/pages/warranty-repairs-returns

Our vests and jackets are US sized in what we consider to be “TRUE TO SIZE”. Because our garments are graded in US even number sizes, they move up and down in smaller increments. 

In general, you should order 1-2” larger than your “upper chest” measurement. This also  depends on your "Fit Preference", so consider what you will wear under the vest and how you prefer the fit (slim tapering or full cut).  If you will layer with the jacket or live in a colder climate, you may want to lean towards 2-3" more than your chest. In most cases 1-2" above the largest section of your torso would be your "Order Size".

TALL CUT
A “Tall Cut” Vest will be 2” longer (front and back). Nothing else changes.
A "Tall Cut” Jacket will be 2” longer in the body and 1” longer in the sleeve.  

ALPHA SIZE to NUMERIC SIZE
Although alpha sizing is very different by manufacturer, a loose comparison would be as follows;
MED=40,42  | LRG=44,46 | XL=48,50 | 2X=52,54  | 3X=56,58

More Information & Links
Vest & Jacket Sizing Page
The Jacket Fit & Leather Guide