Garrison Horsehide #320 | Vintage Tan

Below Belt Back:  26" - 28"Side Leather Cinch StrapsEXCLUSIVE Custom Design & Custom Tanned Leather
7" Slanted Hand Pockets
Inside Zipper Patch Pocket & Inside Open Pocket
Designed In California & Hand-Crafted In Mexico
SKU: 7320-HT

Horween® Front-Quarter "Vintage" Horseshide
Veg-Tanned (Chicago, IL)
5oz. Cotton Pinstripe Chambray Lining
Solid Brass Ykk USA #10 Zippers (USA)

Vintage Horsehide is tanned in Chicago, IL at the Horween® tannery. It is a mid to heavyweight, vegetable tanned horsehide with a FIRM temper. Out of the box it is quite stiff, with a firm body. Tanned with heavy waxes that gives the leather a unique, distressed appearance. Ot of the box it will need a good break-in period. Think of it like raw denim or new western boots, once you break it in, it will be your favorite leather.

A good choice if you want a heavier jacket, will use it for riding or prefer a jacket that you can break-in on your own.

Origin: Horween® Tannery (Chicago, IL USA)
Weight: 3-3.5oz.
Type: Horsehide
Tannage: 100% Vegetable Tanned
Colors: Tan, Brown

The Garrison #32 is a slightly fuller fit than our standard jackets. They are not "over sized" but built to be a comfortable fit as opposed to a "Slim Fit". Order at your normal size or one-size smaller if you prefer a "Slim or Tighter Fit'. The sleeves are cut straight with a larger armhole. The body is tapered from the chest to the bottom by 2-3" and the cinch-straps do function to tighten further. We cut the back length longer to cover your belt. Depending on the size, the back will range from 26-28" on standard cuts and an added 2" longer for a tall cut.

TALL CUTS:
Tall Cut jackets will be 2" longer in the body and 1" longer in the sleeves. Order a tall cut if you are either 6-1' or taller, longer in the torso or you prefer a jacket to fall more than 3" below your belt.

​​This product features our original and signature CCW (Concealed Carry Weapon) pockets. Built on both the LEFT and RIGHT inside panels of the jacket or vest and accessible with a snap closure system. The pockets are lined with a durable 310 Denier nylon and a removable and adjustable retention strap/holster that is attached with Velcro®. 

When not used for CCW, the pockets are fully-functional and can be used for travel, wallets, documents or any other personal valuables.

We love building products a lot more than repairing them!  That’s why we design and build them to last. We want the product to give you a lifetime of use, but if they fail due to a manufacturing defect, we will repair the product or replace it at little or no charge for the life of the item. 

There are some limitations and we do offer a “CLC Trade-In” program as well. Click here to read more about our complete warranty & trade-in policies. 

https://coronadoleather.com/pages/warranty-repairs-returns

​Our vests and jackets are US sized in what we consider to be “TRUE TO SIZE”. Because our garments are graded in US even number sizes, they move up and down in smaller increments. 

In general, you should order 1-2” larger than your “upper chest” measurement. This also  depends on your "Fit Preference", so consider what you will wear under the vest and how you prefer the fit (slim tapering or full cut).  If you will layer with the jacket or live in a colder climate, you may want to lean towards 2-3" more than your chest. In most cases 1-2" above the largest section of your torso would be your "Order Size".

TALL CUT
A “Tall Cut” Vest will be 2” longer (front and back). Nothing else changes.
A "Tall Cut” Jacket will be 2” longer in the body and 1” longer in the sleeve.  

ALPHA SIZE to NUMERIC SIZE
Although alpha sizing is very different by manufacturer, a loose comparison would be as follows;
MED=40,42  | LRG=44,46 | XL=48,50 | 2X=52,54  | 3X=56,58

More Information & LinksVest & Jacket Sizing Page
The Jacket Fit & Leather Guide